Version 1 of Lexing C

Updated 2002-08-15 04:19:44

An important part of any Scripted Compiler is the ability actually process the system language underlying the scripting language. In the case of Tcl this is C.

The first step is always to separate the input stream into tokens, each representing one semantic atom. In compiler speak, lexing.

The following script lexes a string containing C source into a list of tokens. Note: The script assumes that the sources are free of preprocessor statements like "#include", "#define", etc. I am also not sure if the list of 'Def'd tokens is actually complete. This requires checking against the C specification.

The script below is only one of many variations, i.e. it can be twiddled in many ways. Examples:

  • Keep the whitespace as tokens. Might be required for a pretty-printer.
  • Treat comments as whitespace and remove them. True compiler. Keeping the comments, but not other whitespace as in the script below is more something for a code analyzer looking for additional data (meta-data) in comments.
  • Use different 'Def's to convert the keywords and punctuation into single byte codes, and refrain from splitting/listifying the result. Sort of a special method for compressing C sources.

clex.tcl

 # -*- tcl -*-
 # Lexing C

 package provide clex 1.0
 namespace eval  clex {}

 # Most tokens can be recognized and separated from the others via
 # [string map].  The remainder are identifiers.  Except for strings,
 # and comments. These may contain any other token, and we may not act
 # upon them. And both may contain sequences reminiscent of the
 # other. Because of that a first step is to identify and parse out
 # comments and strings, where 'parsing out' means that these tokens
 # are replaced with special char sequences which refer the lexer to a
 # small database. In the final output they are placed back.

 proc clex::SCextract {code mapvar} {
    # Extract strings and comments from the code and place them in mapvar.
    # Replace them with ids

    upvar $mapvar map

    set tmp   ""
    set count 0

    while {1} {
        set comment [string first "/*" $code]
        set string  [string first "\"" $code]

        if {($comment < 0) && ($string < 0)} {
            # No comments nor strings to extract anymore.
            break
        }

        # Debug out
        #puts "$string | $comment | [string length $code]"

        if {
            (($string >= 0) && ($comment >= 0) && ($string < $comment)) ||
            (($string >= 0) && ($comment < 0))
        } {
            # The next vari-sized thing is a "-quoted string.
            # Finding its end is bit more difficult, because we have
            # to accept \" as one character inside of the string.

            set from $string
            while 1 {
                incr from
                set stop  [string first "\""   $code $from]
                set stopb [string first "\\\"" $code $from]
                incr stopb
                if {$stop == $stopb} {set from $stopb ; incr from ; continue}
                break
            }

            set id \[email protected]$count\000
            incr count
            lappend map $id [set sub [string range $code $string $stop]]

            incr stop ; incr string -1
            append tmp [string range $code 0 $string] $id
            set  code  [string range $code $stop end]

            # Debug out
            #puts "\tSTR $id <$sub>"
            continue
        }

        if {
            (($string >= 0) && ($comment >= 0) && ($comment < $string)) ||
            (($comment >= 0) && ($string < 0))
        } {
            # The next vari-sized thing is a comment.

            set  stop [string first "*/" $code $comment]
            incr stop 1

            set id \[email protected]$count\000
            incr count
            lappend map $id [set sub [string range $code $comment $stop]]

            incr stop ; incr comment -1
            append tmp [string range $code 0 $comment] $id
            set  code  [string range $code $stop  end]

            # Debug out
            #puts "\tCMT $id <$sub>"
            continue
        }
        return -code error "Panic, string and comment at some location"
    }
    append  tmp $code
    return $tmp
 }

 proc clex::DefStart {} {
    variable tokens [list]
    #puts "== <$tokens>"
    return
 }

 proc clex::Def {string {replacement {}}} {
    variable tokens
    if {$replacement == {}} {set replacement \000$string\000}
    lappend tokens $string $replacement
    #puts "== <$tokens>"
    return
 }

 proc clex::DefEnd {} {
    variable       tokens
    array set tmp $tokens
    set res [list]
    foreach key [lsort -decreasing [array names tmp]] {
        lappend res $key $tmp($key)
    }
    set tokens $res
    #puts "== <$tokens>"
    return
 }

 proc clex::lex {code} {
    variable tokens

    # Phase I ... Extract strings and comments so that they don't interfere
    #             with the remaining phases.

    # Phase II ... Separate all constant-sized tokens (keywords and
    #              punctuation) from each other.

    # Phase III ... Separate whitespace from the useful text.
    #               Actually converts whitespace into separator characters.

    # Phase IV ... Reinsert extracted tokens and cleanup multi-separator sequences

    if 0 {
        # Minimal number of commands for all phases

        regsub -all -- "\[\t\n \]+" [string map $tokens \
                [SCextract $code scmap]] \
                \000 tmp

        return [split \
                [string map "\000\000 \000" \
                [string map $scmap \
                $tmp]] \000]
    }
    if 1 {
        # Each phase spelled out explicitly ...

        set code [SCextract          $code scmap]    ; # I
        set code [string map $tokens $code]          ; # II
        regsub -all -- "\[\t\n \]+"  $code \000 code ; # III
        set code [string map $scmap  $code]          ; # IV/a
        set code [string map "\000\000\000 \000 \000\000 \000" $code]  ; # IV/b
        set code [split $code \000]

        return $code
    }
 }

 namespace eval clex {
    DefStart

    Def if        ; Def typedef
    Def else      ; Def struct
    Def while     ; Def union
    Def for       ; Def break
    Def do        ; Def continue
    Def switch    ; Def case
    Def static    ; Def goto
    Def extern    ; Def return

    Def *  ; Def /  ; Def +  ; Def -  ; Def % ;
    Def &  ; Def |  ; Def ^  ; Def << ; Def >>
    Def && ; Def || ; Def ++ ; Def --
    Def == ; Def != ; Def < ; Def > ; Def <= ; Def >=

    Def =  ; Def += ; Def -=  ; Def <<= ; Def >>=
    Def |= ; Def &= ; Def ||= ; Def &&= ; Def *=
    Def /= ; Def %= ; Def ^=

    Def . ; Def \; ; Def , ; Def ->

    Def \[ ; Def \]
    Def \{ ; Def \}
    Def (  ; Def )

    DefEnd
 }

driver

 #!/bin/sh
 # -*- tcl -*- \
 exec tclsh "$0" ${1+"[email protected]"}

 source clex.tcl

 set data [read [set fh [open [lindex $argv 0]]]][close $fh]
 set data [clex::lex $data]

 puts __________________________________________________
 #puts $data
 puts [join $data \n]
 puts __________________________________________________
 exit