***Simple Reliability Slot Calculator Example***
----   
This page is under development. Comments are
welcome, but please load any comments
in the comments section 
at the middle of the page. Thanks,[gold]
----
[gold] Here is an eTCL  script on 
to estimate reliability. 
For the push buttons, the recommended
procedure is push testcase and fill frame,
change first three entries a,b,c with
always a>b, push solve, and
then push report. Report allows 
copy and paste from console, but
takes away from computer "efficiency".
---- 
In planning any software, there is 
a need to develop testcases to test
the software. Always a>b.

 
 Testcase 1. 
 

  

 Testcase 2.
  
  Testcase 3.
----
***Screenshots Section***

----
'''Comments Section'''

Please place any comments here, Thanks.
    
----
***References:***
   *  http://www.csgnetwork.com/areaellipse.html
   *  http://easycalculation.com/area/ellipse.php
   *  http://www.cleavebooks.co.uk/scol/callipse.htm     
----

****Appendix Code****
****appendix TCL programs and scripts ****
---- 

****Pretty Print Version *** 
======
    #pretty print from autoindent and ased editor
    # ellipse properties
    # written on Windowws XP on eTCL
    # working under TCL version 8.5.6 and eTCL 1.0.1
    # gold on TCL WIKI , 18aug2010
    frame .frame -relief flat -bg aquamarine4
    pack .frame -side top -fill y -anchor center
  set names {{} {semimajor length a:} {semiminor length b:} {ellipsoid length c :} {area:} {length betw. foci:}} 


    foreach i {1 2 3 4 5 6 7} {
        label .frame.label$i -text [lindex $names $i] -anchor e
        entry .frame.entry$i -width 35 -textvariable side$i
        grid .frame.label$i .frame.entry$i -sticky ew -pady 2 -padx 1
    }
    proc about {} {
        set msg "Calculator for Ellipse Properties.
        from TCL WIKI,
        written on eTCL "
        tk_messageBox -title "About" -message $msg
    }
    proc pi {} {expr acos(-1)}
    proc ellipse5 { xx1   } {
        global side1 side2 side3
        global side4 side5 side6 side7
        set ss side1
        set tt $side2
        set cc  [ expr { $side1*$side1- $side2*$side2  } ]
        set cc  [ expr { sqrt($cc)  } ]
        set term1 [ expr { ($side1*$side1+ $side2*$side2) /2.    } ]
        set perimeterx [ expr { 2.*[pi]*sqrt($term1)} ]
        set area1 [ expr { 1.*[pi]*$side1*$side2  } ]
        set xxx [ expr { $side4*[pi]/180.  } ]
        set side4 $area1
        set side5 [expr { 2.* $cc } ]
        set side7  [ expr { 1.*$cc/$side1 } ]
        set rr  [ expr { $cc/$side1 } ]
        #set side7  [ expr { ((2.*[pi] *$side1*$side2)*(1.*$side2/$side1+($side1/$cc)*asin($rr)))} ]
        set side6 $perimeterx
        return $side7
    }
    proc calculate {     } {
        global colorwarning
        global colorback
        global answer2   answer3
        global side1 side2 side3 side4 side5 side6 side7
        set answer2 5
        set answer2  [ ellipse5  $side1     ]
        set side7 $answer2
    }
    proc fillup {aa bb cc dd ee ff gg} {
        .frame.entry1 insert 0 "$aa"
        .frame.entry2 insert 0 "$bb"
        .frame.entry3 insert 0 "$cc"
        .frame.entry4 insert 0 "$dd"
        .frame.entry5 insert 0 "$ee"
        .frame.entry6 insert 0 "$ff "
        .frame.entry7 insert 0 "$gg "
    }
    proc clearx {} {
        foreach i {1 2 3 4 5 6 7} {
            .frame.entry$i delete 0 end
        }
    }
    proc reportx {} {
        global side1 side2 side3 side4 side5 side6 side7
        console show;
        puts " "
        set gg  [ expr { $side1*$side1- $side2*$side2  } ]
        set gg  [ expr { sqrt($gg)  } ]
        set cx  [ expr { $side1*$side1- $side2*$side2  } ]
        set cx  [ expr { sqrt($cx)  } ]
        set foci [ expr { 2.*$gg  } ]
        set term1 [ expr { ($side1*$side1+ $side2*$side2) /2.    } ]
        set perimeterx [ expr { 2.*[pi]*sqrt($term1)} ]
        set area1 [ expr { 1.*[pi]*$side1*$side2  } ]
        set  eccentricity  [ expr { 1.*$cx/$side1 } ]
        set pp 1.6075
        set aa  [ expr { pow($side1,$pp) } ]
        set bb  [ expr { pow($side2,$pp) } ]
        set cc  [ expr { pow($side3,$pp) } ]
        set term7  [ expr { ($aa*$bb+$aa*$cc+$bb*$cc)/3.} ]
        set term8  [ expr { 1./1.6075 } ]
        set term7  [ expr { pow($term7,$term8) } ]
        set ellipsoidarea [ expr { 1.*4.*[pi]*$term7  } ]
        set ellipsoidvolume [ expr { 1.*(4./3.)*[pi]*$side1*$side2*$side3 } ]
        puts " length between foci    $foci"
        puts " perimeter   $perimeterx"
        puts " area1   $area1"
        puts "eccentricity   $eccentricity    "
        puts "ellipsoid surface area   $ellipsoidarea   "
        puts "ellipsoid volume   $ellipsoidvolume "
    }
    frame .buttons -bg aquamarine4
    ::ttk::button .calculator -text "Solve" -command { calculate   }
    ::ttk::button .test2 -text "Testcase1" -command {clearx;fillup 50. 10. 49. 1570.8  98. 226.5 0.97}
    ::ttk::button .test3 -text "Testcase2" -command {clearx;fillup 200. 100. 173. 6.28E4  346. 993. 0.86}
    ::ttk::button .test4 -text "Testcase3" -command {clearx;fillup 500. 250. 433. 3.9E5  866. 2483.  0.86 }
    ::ttk::button .clearallx -text clear -command {clearx  }
    ::ttk::button .about -text about -command about
    ::ttk::button .cons -text report -command { reportx }
    ::ttk::button .exit -text exit -command {exit}
    pack .calculator  -in .buttons -side top -padx 10 -pady 5
    pack  .clearallx .cons .about .exit .test4 .test3  .test2   -side bottom -in .buttons
    grid .frame .buttons -sticky ns -pady {0 10}
    . configure -background aquamarine4 -highlightcolor brown -relief raised -border 30
    wm title . "Ellipse Properties"
======
  
<<categories>> Numerical Analysis | Toys | Calculator | Example | Mathematics